Samsung Climate Solutions
DVM S HEAT PUMP

Unidade externa

Download BIM/CAD
AutoCAD
3
Revit
3
Solicite um arquivo BIM / CAD

Product
Samsung Climate Solutions / DVM S HEAT PUMP / Unidade externa

ADICIONAR À SUA LISTA DE DESEJOS OU PROJETO
Resumo

DVM S HEAT PUMP By Samsung Climate Solutions

Coleção
Tipo

Unidade externa

• Air-to-air heat pump with variable refrigerant flow R410A
• Inverter fans with vertical air discharge and three-sided suction
• Single outdoor unit up to 26HP
• Outdoor unit with compressor Inverter scroll (n°1-2 compressors)
• Flash injection technology for low temperature performance increase
• "intelligent defrost" technology for defrost period reduction
• Variation of evaporation temperature according to outdoor temp.‎ (via DMS)
• Max pipe length up to 220m; maximum height difference 110m
• Operation up to an external temperature of -25°C
• Communication with "Nasa" protocol
• Power supply: three-phase 400 V - 50 Hz
• All individual sizes have obtained EUROVENT certification.‎

Product codes:
AM080JXVAGH/ET
AM100JXVAGH/ET
AM120JXVAGH/ET
AM140KXVAGH/ET
AM160KXVAGH/ET
AM180KXVAGH/ET
AM200KXVAGH/ET
AM220KXVAGH/ET
AM240KXVAGH/ET
AM260KXVAGH/ET

The flow variation is determined by the difference between the room temperature and the set temperature (ΔT), and the temperature difference of the refrigerant between the inlet and outlet of the evaporator.‎
Obviously this continuous dialogue affects the performances and consequently the consumption of the outdoor unit.‎
For almost all indoor units, except for wall and ceiling models, the electronic expansion valve is installed inside.‎ If the units are used without the valve, a distributor kit with two or three outputs is provided, or the possibility of installing the single valve on the outside.‎
The DVM S allows pump-down or pump-out of the refrigerant gas in indoor/outdoor units to facilitate the operation of maintenance or addition of new indoor units.‎
Summer/winter switching is performed by the user without any intervention by specialised operators.‎
The system also allows to customize the management of individual units allowing to have individual or group control of indoor units, through individual commands, group, centralized or via PC with special management software.‎
The DVM S system has a self-diagnosis and self-start program that verifies the correctness of all operating parameters.‎
Through wireless, all operating data is stored directly on the Smartphone or Tablet.‎

Dimensões
AM080JXVAGH/ET - AM100JXVAGH/ET - AM120JXVAGH/ET: 880 x 1695 x 765 mm

AM140KXVAGH/ET - AM160KXVAGH/ET - AM180KXVAGH/ET - AM200KXVAGH/ET - AM220KXVAGH/ET - AM240KXVAGH/ET - AM260KXVAGH/ET: 1295 x 1695 x 765 mm
Bim e Cad
AutoCAD
Revit

Coleção DVM S por Samsung Climate Solutions
Poderá também gostar de
Produtos vistos recentemente
Download BIM/CAD
AutoCAD
3
DVM S Outdoor 14 16 18 20 22 HP
DVM S Outdoor 24 26 28 30 HP
DVM S Outdoor 8 10 12 HP
Download BIM/CAD
Revit
3
SAMSUNG_DVM S HEAT PUMP 8-10-12
SAMSUNG_DVM S Heat pump KXV 24-26-28-30
SAMSUNG_DVM S HEAT RECOVER - HEAT PUMP 14-16-18-20-22

Salvar em:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Salvar em: