Samsung Climate Solutions
HYDRO KIT LOW TEMPERATURE

Bomba de calor

Download BIM/CAD
AutoCAD
1
Revit
1
Solicite um arquivo BIM / CAD

Product
Samsung Climate Solutions / HYDRO KIT LOW TEMPERATURE / Bomba de calor

ADICIONAR À SUA LISTA DE DESEJOS OU PROJETO
Resumo

HYDRO KIT LOW TEMPERATURE By Samsung Climate Solutions

Coleção
Tipo

Bomba de calor

Materiais

de metal

• Production of hot water
• Production of chilled water
• Max temp.‎ 50
• terminal block for connecting probes/pump (not included)
• terminal block for solar pump connection (not included)
• Water battery connection for AHU
• Connection to radiant panels or low-temp radiators.‎
• Production of domestic hot water

Product codes:
AM160FNBDEH/EU
AM320FNBDEH/EU
AM500FNBDEH/EU

The flow variation is determined by the difference between the room temperature and the set temperature (ΔT), and the temperature difference of the refrigerant between the inlet and outlet of the evaporator.‎
Obviously this continuous dialogue affects the performances and consequently the consumption of the outdoor unit.‎
For almost all indoor units, except for wall and ceiling models, the electronic expansion valve is installed inside.‎ If the units are used without the valve, a distributor kit with two or three outputs is provided, or the possibility of installing the single valve on the outside.‎
The DVM S allows pump-down or pump-out of the refrigerant gas in indoor/outdoor units to facilitate the operation of maintenance or addition of new indoor units.‎
Summer/winter switching is performed by the user without any intervention by specialised operators.‎
The system also allows to customize the management of individual units allowing to have individual or group control of indoor units, through individual commands, group, centralized or via PC with special management software.‎
The DVM S system has a self-diagnosis and self-start program that verifies the correctness of all operating parameters.‎
Through wireless, all operating data is stored directly on the Smartphone or Tablet.‎

Dimensões
AM160FNBDEH/EU: 518 x 627 x 330 mm
AM320FNBDEH/EU: 518 x 627 x 330 mm
AM500FNBDEH/EU: 518 x 627 x 330 mm
Bim e Cad
AutoCAD
Revit

Coleção DVM S por Samsung Climate Solutions
Poderá também gostar de
Produtos vistos recentemente
Download BIM/CAD
AutoCAD
1
DVM S - Hydro Kit HE AM 160 320 500 FNBDEH
Download BIM/CAD
Revit
1
SAMSUNG_ HYDRO KIT HE

Salvar em:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Salvar em: