SAMSUNG EHS TDM PLUS - HYDRONIC MODULE

Bomba de calor

Download BIM/CAD
AutoCAD
1
Revit
1
Solicitar un archivo BIM / CAD

Product
SAMSUNG / EHS TDM PLUS - HYDRONIC MODULE / Bomba de calor

ADD TO WISHLIST OR PROJECT
Resumen
Colección
Nombre producto/artículo

EHS TDM PLUS - HYDRONIC MODULE

Tipo

Bomba de calor

Materiales

de metal

The EHS system integrates into a single solution 3 types of system: the air-to-air heat pump system, air-to-water system (underfloor heating) and the production of domestic hot water.‎ Main feature is the TDM (Time Division Multi) control system able to make the best use of the combination of the three systems in order to reach full operation in short time of the system with consequent energy saving and improvement of the environmental comfort.‎ Less consumption means less CO2 emissions and therefore more respect for the environment, as well as significant economic savings.‎
Underfloor heating, which is used by the system, is considered the optimal choice for the heating of rooms given the width of the radiant surface and the low temperature to be reached.‎ However, due to its thermal inertia, it takes from 4 to 8 hours to be heated and achieve a good level of comfort.‎ Samsung EHS cancels this time interval with TDM technology that combines underfloor heating with air split units, ensuring the optimum internal temperature in an interval between -25°C and +43°C.‎
The main technological advantage, in fact, lies in the reduction, during the winter, of the time to reach full operation of the system.‎ To do this, the system uses internal wall-mounted units with air-to-air in heat pump to bring the environment to set point temperature.‎ When the optimum level is reached, the temperature is kept constant by the action of the floor system.‎

• plate exchanger and integrated circulation pump
• N°2 integrated (deactivated) electrical resistors for water heating "Turbo" function
• Wire control included remotizable for complete hydronic management
• Water delivery temperature 5~55°C
• Power supply: single-phase 220 V - 50 Hz or three-phase 400 V - 50 Hz

Product codes:
AE090MNYDEH/EU
AE090MNYDGH/EU
AE160MNYDEH/EU
AE160MNYDGH/EU

Dimensiones
AE090MNYDEH/EU : 510 x 850 x 315 mm
AE090MNYDGH/EU : 510 x 850 x 315 mm
AE160MNYDEH/EU : 510 x 850 x 315 mm
AE160MNYDGH/EU : 510 x 850 x 315 mm
Bim y Cad
AutoCAD
Revit

Colección Bombas de calor EHS por SAMSUNG
También te recomendamos...
Productos vistos recientemente
Download BIM/CAD
AutoCAD
1
[DWG] EHS TDM Plus Hydro Kit
Download BIM/CAD
Revit
1
EHS TDM PLUS - HYDRO MODULE

Guardar en:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Guardar en: