Samsung Climate Solutions
DVM S - MINI HEAT RECOVERY UNIT

Recuperador de calor

Download BIM/CAD
Revit
1
Solicitar un archivo BIM / CAD

Product
Samsung Climate Solutions / DVM S - MINI HEAT RECOVERY UNIT / Recuperador de calor

AÑADIR A TU LISTA DE DESEOS O PROYECTO
Resumen

DVM S - MINI HEAT RECOVERY UNIT By Samsung Climate Solutions

Colección
Tipo

Recuperador de calor

• Single model for both heat pump and heat recovery variable refrigerant  flow R410A
• Inverter fans with front air supply and rear intake
• One-piece external unit up to 6HP
• Connection up to 10 indoor units (up to 130% saturation)
• Rotary Twin Inverter outdoor unit compressor (4-5-6 HP)
• Operation up to an outdoor temperature of -20°C
• Communication with "Nasa" protocol
• Power supply: single-phase 220 V - 50 Hz or three-phase 400 V - 50 Hz
• All individual sizes have obtained EUROVENT certification.‎

Product codes:
AM040NXMDER/EU
AM040NXMDGR/EU
AM050NXMDER/EU
AM050NXMDGR/EU
AM060NXMDER/EU
AM060NXMDGR/EU

The flow variation is determined by the difference between the room temperature and the set temperature (ΔT), and the temperature difference of the refrigerant between the inlet and outlet of the evaporator.‎
Obviously this continuous dialogue affects the performances and consequently the consumption of the outdoor unit.‎
For almost all indoor units, except for wall and ceiling models, the electronic expansion valve is installed inside.‎ If the units are used without the valve, a distributor kit with two or three outputs is provided, or the possibility of installing the single valve on the outside.‎
The DVM S allows pump-down or pump-out of the refrigerant gas in indoor/outdoor units to facilitate the operation of maintenance or addition of new indoor units.‎
Summer/winter switching is performed by the user without any intervention by specialised operators.‎
The system also allows to customize the management of individual units allowing to have individual or group control of indoor units, through individual commands, group, centralized or via PC with special management software.‎
The DVM S system has a self-diagnosis and self-start program that verifies the correctness of all operating parameters.‎
Through wireless, all operating data is stored directly on the Smartphone or Tablet.‎

Dimensiones
AM040NXMDER/EU: 940 x 1210 x 330 mm
AM040NXMDGR/EU: 940 x 1210 x 330 mm
AM050NXMDER/EU: 940 x 1210 x 330 mm
AM050NXMDGR/EU: 940 x 1210 x 330 mm
AM060NXMDER/EU: 940 x 1210 x 330 mm
AM060NXMDGR/EU: 940 x 1210 x 330 mm
Bim y Cad
Revit

Colección DVM S por Samsung Climate Solutions
También te recomendamos...
Productos vistos recientemente
Download BIM/CAD
Revit
1
SAMSUNG_DVM S MINI HEAT RECOVER 4-5-6

Guardar en:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Guardar en: