Samsung Climate Solutions
EHS TDM PLUS

Bomba de calor

Download BIM/CAD
AutoCAD
3
Revit
3
Solicitar un archivo BIM / CAD

Product
Samsung Climate Solutions / EHS TDM PLUS / Bomba de calor

AÑADIR A TU LISTA DE DESEOS O PROYECTO
Resumen

EHS TDM PLUS By Samsung Climate Solutions

Colección
Tipo

Bomba de calor

Materiales

de metal

 Outdoor unit with air-water heat pump (hydronic)/air-air.‎
• Air-water side for heating /cooling floor or low temperature radiators.‎
• Air-water side for domestic hot water production.‎
• Air-to-air side with wall-mounted/duct/console units with direct expansion.‎
• Possibility to connect up to 7 indoor units (depending on the size of the outdoor unit).‎
• floor cooling with air-to-air unit in dehumidification.‎
• Double temperature management (DHW/heating).‎
• Possibility of Water Law.‎
• Maximum output of 90% of potential even with an outdoor temperature of -10°C.‎
• Operation up to an outdoor temperature of -25°C.‎
• Outdoor unit with Rotary Inverter compressor.‎
• Power supply: single-phase 220 V - 50 Hz or three-phase 400 V - 50 Hz.‎

Product codes:
AE044MXTPEH/EU
AE066MXTPEH/EU
AE090MXTPEH/EU
AE090MXTPGH/EU
AE120MXTPEH/EU
AE120MXTPGH/EU
AE160MXTPEH/EU
AE160MXTPGH/EU

The EHS TDM Plus system integrates into a single solution 3 types of system: the air-to-air heat pump system, air-to-water system (underfloor heating) and the production of domestic hot water.‎ Main feature is the TDM (Time Division Multi) control system able to make the best use of the combination of the three systems in order to reach full operation in short time of the system with consequent energy saving and improvement of the environmental comfort.‎ Less consumption means less CO2 emissions and therefore more respect for the environment, as well as significant economic savings.‎
Underfloor heating, which is used by the system, is considered the optimal choice for the heating of rooms given the width of the radiant surface and the low temperature to be reached.‎ However, due to its thermal inertia, it takes from 4 to 8 hours to be heated and achieve a good level of comfort.‎ Samsung EHS cancels this time interval with TDM technology that combines underfloor heating with air split units, ensuring the optimum internal temperature in an interval between -25°C and +43°C.‎
The main technological advantage, in fact, lies in the reduction, during the winter, of the time to reach full operation of the system.‎ To do this, the system uses internal wall-mounted units with air-to-air in heat pump to bring the environment to set point temperature.‎ When the optimum level is reached, the temperature is kept constant by the action of the floor system.‎
The line-up features the new WindFree Wall-Mounted and the new ClimateHub, an integrated solution that encloses the hydro kit and an water tank of 200 or 260 liters.‎
Thanks to its compact size, the ClimateHub fits perfectly in the service rooms inside the house.‎

Dimensiones
AE044MXTPEH/EU - AE066MXTPEH/EU: 880 x 793 x 310 mm

AE090MXTPEH/EU - AE090MXTPGH/EU: 940 x 998 x 330 mm

AE120MXTPEH/EU - AE120MXTPGH/EU - AE160MXTPEH/EU - AE160MXTPGH/EU: 940 x 1420 x 330 mm
Bim y Cad
AutoCAD
Revit

Colección Bombas de calor EHS por Samsung Climate Solutions
También te recomendamos...
Productos vistos recientemente
Download BIM/CAD
AutoCAD
3
EHS TDM Plus Outdoor - AE 044 066 MXTPEH
EHS TDM Plus Outdoor AE 090 MXTP H
EHS TDM Plus Outdoor AE 120 160 MXTP H
Download BIM/CAD
Revit
3
SAMSUNG_EHS TDM PLUS 6,6
SAMSUNG_EHS TDM PLUS 4,4
SAMSUNG_EHS TDM PLUS 12 16

Guardar en:

Conferma la tua posizione

per scoprire le offerte valide nella tua zona

CAP
OK
Usa la mia posizione
Guardar en: